Experience industrial-level power with the RYOBI 1500W SDS+ rotary hammer. This one power tool is your ultimate solution for all those rotary hammering, chiselling and drilling jobs that take that extra bit of muscle. The unit delivers energy on impact of 5.0J with an impact rate of 4,400 bpm. You’ll be ready to handle any drilling through wood, metal or even masonry. The RYOBI 1500W rotary hammer delivers professional power at no cost to convenience. Included in each kit is everything you’ll need for any drilling or chiselling tasks. The 3 drill bits in each pack are more than enough to handle any repairs, renovations or constructions you’ll face. The wrench, flat and pointed chisel bits and depth guide rods are the ultimate accessories for this extremely versatile power tool. Get your RYOBI 1500W SDS+ rotary hammer from your local Bunnings Warehouse today.
NeonCarrot again. the drill has several settings, one allowing it to be used as a regular (non-impact) drill. How much torque does the drill produce? Forget the impact aspect - I simply want the torque figure to understand what loads it can work through. Pushing the drill through hard material (in its rotary mode) hard enough, will cause it to stall, and unless the drill is relieved of the pressure the motor will burn out. I've just figured it out. 1500 watts = 2.01hp (elec). (hp x 5252)/ rpm = ft lbs. So (2.01 x 525) / 900 = 11.7 ft lbs. Not much. I guess I'll be returning my Ryobi (unused) = clearly lacks guts.
Answered by: NeonCarrot
Date published: 2018-08-28
Can the chuck be swapped out with a jacobs or keyless chuck to take standard drill bits for drilling?
Asked by: Troy
Hi Troy,
Thanks for getting in touch.
We don't advise swapping over or removing the SDS+ chuck on this drill.
Reach out to us if you require any assistance via the Ryobi customer support team,
AU: ☎ 1300 69 79624 or ryobi.custhelp.com/app/support/ask
NZ: ☎ 0800 279 624 or ryobi.co.nz/media/contacts
Answered by: RYOBI Team
Date published: 2018-08-22
does this tool come with a storage case etc
Asked by: Elias
Hi Elias,
Thanks for getting in touch.
Yes, this unit comes with a blow molded case included.
Reach out to us if you require any assistance via the Ryobi customer support team,
AU: ☎ 1300 69 79624 or ryobi.custhelp.com/app/support/ask
NZ: ☎ 0800 279 624 or ryobi.co.nz/media/contacts
Answered by: RYOBI Team
Date published: 2018-08-20
For the Ryobi SDS+ 1500 rotary hammer drill, when do I put lubricant into the grease cap?
In the manual, I read, "LUBRICATION - All of the bearings in the product are lubricated with a sufficient amount of high grade lubricant for the life span . .
Asked by: RSDS1500Kowner
Hi,
Thanks for getting in touch.
We suggest to:
1. Add 10g grease every 45 hours if continuous use
2. Add 10g grease every 55 hours if accumulate use
Reach out to us if you require any assistance via the Ryobi customer support team,
AU: ☎ 1300 69 79624 or ryobi.custhelp.com/app/support/ask
NZ: ☎ 0800 279 624 or ryobi.co.nz/media/contacts
Answered by: RYOBI Team
Date published: 2018-07-23
Hi, Is this rotary hammer strong enough and appropriate to remove floor tiles on area of 60-70 sqrm?
